PRODUCT CATEGORY

PRODUCT SEARCH

NEWSLETTER

Register now!Newsletter subscription

  • CATALOG PDF Download
  • BROCHURES PDF Download
Products

Touch Burner APT-3

Touch Burner APT-3
Cat. No.
PHD-APT3-EX
Quantity
1UNIT
Price
¥ 27,000
$ 360
€ 270
Inventory
Available
Intended use
Small and compact burner which does not require a gas hose. The burner can stay on continuously. The flame is adjustable enabling use of the burner for a variety of tasks.
Composition
Size: 59x141x67 mm
Wight: 250g
1 x AA Battery attached
Other
[Features]
Stylish, compact and operator comfortable
Allows comfortable one-handed operation
Remaining gas amount can be observed easily
Application is various due to adjustable flame
Design to prevent wax accumulation in tube
Easy to refillwith standard butane refills
AA battery included
※We can not provide you with the Gas Bombe. Please purchase appropriate Gas Bombe sold in your country to use with the APT3 Touch Burner.
[Gas Filing]
Make sure push button is locked and battery is removed.
Set the product upside down before you inset gas cartridge.
Fill a gas by inset the gas cartridge (for cigarette lighter) upright to gas inlet on bottom of the product.
Do not fill a gas in the vicinity of combustible materials.
Please take the body and a gas cylinder with your hand when you fill up.
[Cleaning the burner pipe]
Dust may clog burner pipe and lead to an ignition
failure.
Clean it properly with following procedure.
Make sure push button is locked and battery is removed.
Keep pressing the upper part of front panel as pulling it forward.
Front panel will come off. Remove the connector on both sides of burner pipe. Hold burner pipe firmly and remove burner pipe by
loosening a hexagon nut on bottomside of burner pipe with 7mm wrench.
Clean a pinhole as described on
figure, with cotton swabs.
Wash burner pipe with hot water and dry it completely.
Reassemble burner pipe by inverting the steps 2- 4.
[Safety Instructions]
This productuses flammable gas and could initiate high-temperature flame. Use with caution to avoid possible risk of fire or burns.
When you move the product, please put out a fire, remove a battery, and keep the push button locked by the lock slide.
Do not store this product in the vicinity of combustible materials or possible flammable chemicals.
Use this product in level, on a stable table.
Confirm that wax is not in the combustion pipe before use.
Do not use this product where flame is drift to sideways, such as near air conditioner, to avoid overheating the product which causes a fire.
Use this product in well-ventilated place. Prolong use in poor-ventilation room could carbon monoxide by incomplete combustion.
Do not disassemble this product. Do not remove stickers on the product.


[Warranty]
The touch burner is warranted to be free from defects in materials or workmanship for a period of one year from your purchased date. We will replace defective products or parts without any charges for defects which have occurred during the warranty period, except for defects from conditions outlined below. Please note that defects described below are specially excluded from the our warranty policy.

1. Improper operation of the instrument.
2. Repair or modification by any person or company who is not authorised by Cosmo Bio Co., Ltd.
3. Use of fittings or other spare parts supplied by any person or company other than Cosmo Bio Co., Ltd.
4. Damage caused by any (in)-direct accident, neglect or misuse.
5. Damage caused by natural disasters.
6. Damage caused by any improper solvents or samples.
Storage
RT
Shipping temperature
RT
Touch Burner APT-3
Touch Burner APT-3
Touch Burner APT-3
Touch Burner APT-3
Touch Burner APT-3
Touch Burner APT-3
Touch Burner APT-3
Touch Burner APT-3